Accepting A Call - Siemens SXG75 User Manual

Setting the volume
Regulate the volume (on-
+/ -
ly possible during a call).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redialling previous
numbers
To enter the
Dialled calls
by mode):
A
Press the Call key.
To redial the number last called:
A
Press the Call key again
(not in video call mode).
Or
j
Press the video call key to
make a video call.
To redial other numbers that were
dialled previously:
I
Pick out the number from
the list.
A
Press the Call key (not in
video call mode).
Or
j
Press the video call key
to make a video call.
list (in stand-
Additional information
*
Press and hold to switch
microphone off.
International dialling codes
0
Press and hold until a "+" is
displayed.
Number memo
You can enter a number during the call. The
person to whom you are speaking can hear
these entries. When the connection has
ended you can save or dial the number.

Accepting a call

The phone must be switched on.
An incoming call is indicated by a
special screen:
A number and the name of the caller
transmitted by the network will be
displayed if the number is saved in
the contacts. A picture of the caller
may also be displayed (page 38).
If the incoming call is a video call a
video of the caller is displayed. How-
ever, the transmission of the video
may be suppressed by the caller.
A
Press.
Or
C
Press.
Or
j
Press to accept a video call.
Calling 31