Siemens SXG75 User Manual page 123

122 Settings
Divert other call types
All calls/Data/Fax/Messages
Select a call type and con-
firm with
Open menu and select
§Options§
Set.
Enter the number you
J
want to divert to. Or se-
lect
tions menu and select a
contact.
Check status
Open menu and select
§Options§
Check
You can check the current divert
status for all conditions. After a
short pause, the current situation is
transmitted by the network and
displayed.
Clear all
Open menu and select
§Options§
Clear
All set diversions are cleared.
C
Confirm with
Additional information
Note that the divert is stored in the network
and not in the phone (e.g., when the
SIM card is changed).
Reactivate divert
The last divert has been stored. Proceed
as with "Set divert". The stored number is
displayed. Confirm number.
C
.
from the op-
Contacts
status.
all.
.
All calls
All calls are diverted.
Ç
Unanswered
A call is diverted in the following sit-
uations:
(see below).
Not reachable
A call is diverted if the phone is
b
switched off or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
b A call is diverted if another call is in
progress. If you activated
(page 121), you will hear the call
waiting tone during a call (page 33).
Fax
Fax calls are diverted to a number
with a fax connection.
Data/Messages
Data calls are diverted to a number
with a PC connection.
Symbol in the top line of
the display in standby
mode.
Not reachable, No
b
b
reply, Busy
b
b
b
Call waiting
b
b