Call Divert - Siemens SX1 User Manual

Call divert

You can set the conditions
for which calls are diverted to your
mailbox or other numbers. For de-
tails contact your service provider.
You can set divert as follows:
The most common condition for call
divert is:
If not answered
C
KSetupKCall divert
If not answered
Select.
Select, then choose:
Activate
To voice mailbox
to divert to your voice
mailbox number (p. 88)
or
To other number
Enter another number to
which calls should be di-
verted.
Select the delay time after which a
call should be diverted.
B
Press OK. After a short
pause, the setting is con-
firmed by the network.
Setup
Divert conditions
The following conditions for call di-
verting are available:
All voice calls, If busy, If not answered, If
out of reach, If not available, All fax calls,
All data calls.
Check status
OptionsKCheck status
Check whether the divert is activated
or not.
Cancel diverts
OptionsKCancel all diverts
All set diverts are cleared.
83