Divert; Divert For Call - Siemens CL50 User Manual

44
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
§Menu§

Divert

You can set divert as follows:
The most common condition for for-
warding is:
Unanswered
§Menu§ Divert
B
Select:
Unanswered.
Press.
§Select§
Set Select.
J
Enter the phone number
to which a call will be di-
verted (if not already
done).
Press. After a short
§OK§
pause, the setting is con-
firmed by the network.
Unanswered
This setting covers the most important con-
ditions (see also on the right):
Not reachable, No reply, Busy
Divert
All calls
All calls are diverted.
Not reachable
Divert if the phone is switched off or
out of range.
No reply
A call is only diverted after a delay
(depends on the network). The peri-
od can be set by the user to a maxi-
mum of 30 seconds.
Busy
Divert if a call is in progress.
Exception: If
(p. 69), you will hear the call waiting tone
during a call (p. 13).
Receiving fax
Fax calls are diverted to a number
with a fax connection.
Receiving data
Data calls are diverted to a phone
number with a PC connection.
Call waiting is activated