Options During A Call - Siemens SX1 User Manual

Siemens cell phone user guide
Hide thumbs Also See for SX1:
Table of Contents

Advertisement

14
OptionsKConference
To add another person to
the conference, repeat
procedure and then
select:
OptionsKAdd to conference
Private
You can have a private conversation
with one of the conference partici-
pants:
OptionsKConferenceKPrivate
Select participant.
B
Press Private.
You can now have a private discus-
sion, while the rest of the confer-
ence participants continue talking.
To end the private conversation and
go back to the conference:
OptionsKConference
Drop
To remove one participant from the
conference:
OptionsKConference
KDrop participant
Select participant.
B
Press Drop.
Making a phone call

Options during a call

BT handsfree on, End active call, Hold/
Unhold, Mute/Unmute, New call, Add to
conference, Send DTMF, Answer, Reject,
Mute
Most relevant functions:
Mute/Unmute
Switch microphone on/off.
If switched off, the person on the
other end of the line cannot hear you
(muting)
Transfer
The original call is joined to the sec-
ond one. For you, both calls are now
ended
Send DTMF
You can enter control codes (digits)
during a call so that an answering
machine can be controlled remotely.
These digits are directly transmitted
as DTMF tones (control codes).
*
Press to produce a *.
#
Press to produce a #.
*
Press twice to produce "p"
for a pause of approx.
2 seconds, and press
3 times to produce "w" if
you want the remaining
sequence not to be sent
until you press
during the call.
B
Press
Send
again
to send the tone.
OK

Advertisement

Table of Contents
loading

Table of Contents