Status Indicators - Allen-Bradley ControlNet 1786-RPFM Installation Instructions Manual

IMPORTANT

Status Indicators

The figure below identifies the LEDs on the module.
Figure 7 Status Indicators:
Channel 1 LED
Status Indicator (LEDs)
Off
Green
Flashing Green/Off
ControlNet Modular Repeater Medium Distance Fiber Module
Be certain that the fiber cable you connect to Channel 1 (RX)
on one 1786-RPFM repeater to Channel 1 (TX) on the other
1786-RPFM repeater. You can use Channel 1 or Channel 2 on
either module.
Probable Cause
Repeater not connected to power supply
Repeater is running without errors. The received data frames
are within specification for bit width distortion.
No data activity on network.
Publication 1786-IN011B-EN-P - October 2000
15
Channel 2 LED
42600