Important User Information - Allen-Bradley ControlNet 1786-RPFM Installation Instructions Manual

2 ControlNet Modular Repeater Medium Distance Fiber Module
You can purchase a printed manual by:
• contacting your local distributor or Rockwell Automation representative
• visiting www.theautomationbookstore.com and placing an order
• calling 800.963.9548 (USA/Canada) or 001.320.725.1574 (outside USA/Canada)

Important User Information

Because of the variety of uses for the products described in this publication, those
responsible for the application and use of this control equipment must satisfy
themselves that all necessary steps have been taken to assure that each application
and use meets all performance and safety requirements, including any applicable
laws, regulations, codes and standards.
The illustrations, charts, sample programs and layout examples shown in this guide
are intended solely for purposes of example. Since there are many variables and
requirements associated with any particular installation, Allen-Bradley does not
assume responsibility or liability (to include intellectual property liability) for actual
use based upon the examples shown in this publication.
Allen-Bradley publication SGI-1.1, Safety Guidelines for the Application, Installation
and Maintenance of Solid-State Control (available from your local Allen-Bradley
office), describes some important differences between solid-state equipment and
electromechanical devices that should be taken into consideration when applying
products such as those described in this publication.
Reproduction of the contents of this copyrighted publication, in whole or part,
without written permission of Rockwell Automation, is prohibited.
Throughout this manual we use notes to make you aware of safety considerations:
ATTENTION
!
Attention statements help you to:
• identify a hazard
• avoid a hazard
• recognize the consequences
IMPORTANT
Allen-Bradley is a trademark of Rockwell Automation
Publication 1786-IN011B-EN-P - October 2000
Identifies information about practices or circumstances that can
lead to personal injury or death, property damage or economic
loss
Identifies information that is critical for successful application
and understanding of the product.