Remove The Protective Caps - Allen-Bradley ControlNet 1786-RPFM Installation Instructions Manual

10 ControlNet Modular Repeater Medium Distance Fiber Module

Remove the Protective Caps

1. Remove the protective caps from the fiber ports that you are going to use.
2. Save the caps for future use.
Figure 2 Protective Caps
DIN rail
Protective cap
The left side of the module (not shown here) also
contains a backplane connector
If you plan:
not to use channel(s)
to place the module in storage
to connect another module to the right
backplane connector
not to connect to the right backplane connector
Publication 1786-IN011B-EN-P - October 2000
Then:
keep the protective caps on the channels to protect
the unit from dust.
keep the protective caps on the channels to protect
the unit from dust.
remove the protective backplane cap and save cap
or future use.
leave the backplane cap on.
Protective
backplane cap
42599