3_3 Ec Standard Compliance Marking; 3_4 Fcc & Ic Compliance; 3_4_1 Federal Communications Commission - Ingenico iSMP4 User Manual

flashes the message, Alert Irruption! The terminal is locked
and cannot be used. If you observe the Alert Irruption!
message, contact the terminal help desk immediately.
Ensure that access to your terminal is granted only to staff
that have been independently verified as being trustworthy.
CAUTION
Never ask customers to divulge their PIN. Advise customers
to ensure that they are not being watched when entering
their PIN.

3_3 EC standard compliance marking

"Refer to the EU declaration of conformity"
3_4 FCC & IC Compliance
FCC & IC has a specific naming.
The references uses for FCC & IC certifications for Bluetooth wifi
contact less terminals are:
IC Number : 2586D-ISMP4CLBTWI
FCC ID: XKB-ISMP4CLWIBT
The references uses for FCC & IC certifications for Bluetooth contact
less terminals are:
IC Number : 2586D-ISMP4CLBT
FCC ID: XKB-ISMP4CLBT
15.21
You are cautioned that changes or modifications not expressly
approved by the part responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
iSPM4_User guide
900025697 R11 000 03/1216
3_4_1 Federal Communications Commis-
sion (FCC) Statement
Copyright© 2016 Ingenico
9
All rights reserved