3_5 Symbol - Ingenico iSMP4 User Manual

3_5 Symbol

The following symbols area used on the terminal and the power supply:
The CE
requirements of the applicable EC directives. It is a mandatory
HYPERLINK
"Certifi cation mark" conformity symbol for certain products sold within
the HYPERLINK
Area" \o "European Economic Area" European Economic Area (EEA).
The UL symbol appears on end-user products and complete
components suitable for factory and fi eld installation. All
component suitable carrying these symbols are covered
by our Follow-Up Services program to determine that
component continue to be manufactured in compliance with UL's safety
requirements.
The RCM symbol indicates compliance with the Australian
Communications and Media Authority's (ACMA) regulatory
arrangements for telecommunications, radio, EMC, and
electromagnetic energy (EME).
Waste of Electrical and Electronic Equipment (WEEE) symbol
indicates that when the end-user discards this product, it
must be sent to separate collection facilities for recovery and
recycling.
This symbol indicates that the terminal operates with
alternative voltage. It is followed by the ratings (voltage and
current for instance).
This symbol indicates that the terminal operates with
continuous voltage. It is followed by the ratings (voltage
and current for instance).
Mark indicating a power supply meets the level VI
requirements.
iSPM4_User guide
900025697 R11 000 03/1216
symbol indicates
"http://en.wikipedia.org/wiki/Certifi cation_mark"
"http://en.wikipedia.org/wiki/European_Economic_
This TÜV symbol indicates that a component suitable
was examined by experts and there are no safety
concerns.
that the product
Copyright© 2016 Ingenico
13
All rights reserved
meets the
\o