Comtech EF Data MBT-4000B User's Installation And Operation Manual page 43

MBT-4000B Multi-band Transceiver System
Updating Firmware
•
First, click [Start] on the Windows taskbar, and then click the 'Run...' icon (or,
depending on Windows OS versions prior to Windows 95, click the 'MS-DOS
Prompt' icon from the Main Menu).
•
Next, open a Command-line window...
o For Windows 95 or Windows 98 – Type "command".
o For any Windows OS versions later than Windows 98 – Type "cmd" or
o Alternately, from [Start], select All Programs > Accessories > Command
o Finally, from the Command-line 'c:\>' prompt, type "mkdir temp" or "md temp"
There should now be a 'temp' folder created and available for placement
of the firmware file download.
"command".
Prompt.
(mkdir and md stand for make directory), and then click [OK].
5–5
Revision 1
MN/MBT4000B.IOM