KEB C6-COMPACT Instruction Manual page 6

KEB COMBICONTROL
Axis interface X1A ... X1D
Type
Connector
Cable
Speed
Using
Ethernet interfaces X6B, X6C
Type
Connector
Speed
Using
Serial interface
Type
Connector
Speed
Using
Memory of the programming system
The program memory size (code, data, flags, input, output) is not limited and depends
only on the available free total memory (max. 32 MBytes).
GB - 6
HSP5/485
RJ-45, 8-pole, screened
Cat5, max. 100 m
38.4...250 kBaud
Connection to KEB F5 inverter/servo, process
data transmission, communication channel
IEEE802.3
10/100BaseTx
RJ-45, 8-pole, screened
10/100 MBaud
autocrossover
Connection to programming system (debugging,
visualization).
Connection to parameterizing system (control
and axis adjustment, scope).
Connection to any devices
(SysSocket). Die 2. Ethernet interface X6C is
only accessible by the IEC program and is used
e.g. for the EtherCAT master.
DIN66019II, RS232, RS485 full/half duplex
D-Sub 9 female
9.6...115.2 kBaud
Connection to parameterizing system
(control and axis adjustment, scope).
Connection to any devices
(SysCom).