KEB C6-COMPACT Instruction Manual page 2

Preface
KEB reserves the right to change/adapt specifications and technical data without prior notice.
The safety and warning directions specified in this manual is not exhaustive. The manual
and the information contained in it is made with care. KEB don´t accept a guarantee for
misprint or other errors or resulting damages.
The marks and product names are trade marks or registered trade marks of the respective
title owners.
This instruction manual describes the software state 3.4.1.3 from 07/2012. The information
contained in the technical documentation, as well as any user-specific advice in spoken and
written and through tests, are made to best of our knowledge and information about the ap-
plication. However, they are considered for information only without responsibility. This also
applies to any violation of industrial property rights of a third-party. Inspection of our units in
view of their suitability for the intended use must be done generally by the user. Inspections
are particularly necessary, if changes are executed, which serve for the further development
or adaption of our products to the applications (hardware, software or download lists). In-
spections must be repeated completely, even if only parts of hardware, software or download
lists are modified.
Application and use of our units in the target products is outside of our control and
therefore lies exclusively in the area of responsibility of the user.
Copyright
The customer may use the instruction manual as well as further documents or parts from it for
internal purposes. Copyrights are with KEB and remain valid in its entirety.All rights reserved.
, COMBIVERT
KEB
®
of Karl E. Brinkmann GmbH.
Other wordmarks or/and logos are trademarks (TM) or registered trademarks (
of their respective owners and are listed in the footnote on the first occurrence.
When creating our documents we pay attention with the utmost care to the rights of third
parties.Should we have not marked a trademark or breach a copyright, please inform us in
order to have the possibility of remedy.
GB - 2
Danger
Is used when the life or health of the user is in danger or consi-
Warning
derable damage to property can occur.
Caution
Attention
Is used when a measure is necessary for safe and disturbance-
observe at
free operation.
all costs
Information
Is used, if a measure simplifies the handling or operation of the
Aid
unit.
Tip
, KEB COMBICONTROL
®
and COMBIVIS
® ®
are registered trademarks
)
®