Table of Contents
Advertisement
5.
MAINTENANCE MENUS
The adjustment of this printer can be implemented using the maintenance utility and also by key
input through the operator panel.
This printer provides maintenance menus, apart from the normal menus. Select the menu that best
suits the purpose of your intended adjustment.
5.1
System maintenance menu (For maintenance personnel)
This menu is activated when the power is turned with the MENU+ and MENU- keys held down.
The menu indications are given in English only, irrespective of the destination of the printer.
Note! Since this menu is likely to be changed depending on the destination or for other
reason, it is not disclosed to the end users.
Category
SYSTEM MAINTE
OKIUSER
MAINTENANCE
MENU
92
Table 5-1. Maintenance menu indication table (1/3)
Item(1st Line)
Value(2nd Line)
ENTER
xxxxxxxxxxxxxxx
PASSWORD
OKIUSER
ODA
OEL
APS
JP1
JPOEM1
OEMA
OEML
FLASH FORMAT
EXECUTE
MENU RESET
EXECUTE
d-Color P116 Service Manual
DF
Function
000
000
Used to set the destination.
*
JPOEM1: Japan OEM
OEMA: Overseas OEM for A4 default
OEML: Overseas OEM for Letter
default
When the menu is dismissed, the
printer is automatically rebooted.
Default is OEL.
-
Do not use.
Initializes the Flash ROM.
When this item is executed, the menu
is dismissed, and formatting of the
flash device mounted in the Resident
(Onboard) begins. (CAUTION! NIC
F/W will be erased.see section 7.4.4)
-
Resets the EEPROM contents to the
factory defaults. After the settings
have been changed, the printer is
automatically rebooted.
* Certain special items are not
initialized.
Y110260-4
Advertisement
Chapters
Table of Contents
Troubleshooting
