Print Density Adjustment Test - Olivetti d-Color P116 Service Manual

<<BLT REFLECT RSLT is executed>>
The same as the key operation of Item2. in the execution of BLT REFLECT TEST.
4. Repeat Items 2 and 3, as needed.
5. Press the [BACK] key to terminate the test. (Status of Item 1 restored)
Color registration adjustment test items
Display
REG ADJ EXECUTE
REG ADJ RESULT
BLT REFLECT TEST
BLT REFLECT RSLT

5.3.7 Print density adjustment test

This self-diagnosis is practiced to conduct testing on the Print density adjustment function of the
printer and to view the execution result. This test is executed also to judge whether the Print density
adjustment mechanism is normal or abnormal.
1. Activate the self-diagnostic (Level 1) mode, and press and hold down the [MENU+] key or
[MENU-] key, until the following message appears:
DENS ADJ TEST
2. Pressing the [ENTER] key causes the following message to appear. Press and hold down the
[MENU+] key or [MENU-] key, until the intended item is displayed.
DENS ADJ TEST
DENS ADJ EXECUTE
3. Pressing the [ENTER] key executes the test of the item currently displayed on the panel.
<< DENS ADJ EXECUTE is executed>>
1 A density correction test is conducted. ([READY] light blinking)
2 When the test ends, the test result (OK or error name) appears in the upper line of the
display section, and **** RESULT, in the lower line.
OK
DENS ADJ RESULT
Pressing the [MENU+] key increments the test result sequentially in the display.
Pressing the [MENU-] key decrements the test result sequentially in the display.
Pressing the [BACK] key restores the status of Item 2.
3 Pressing the [CANCEL] key while the test is under way aborts the test ([READY] light comes
on) and restores the status of Item 2.
110
Color registration adjustment
Execution of
Color registration adjustment
Viewing of the
Execution of the judgment of good or bad
adjustment
belt reflectivity
Viewing of the result of judgment of good or bad
adjustment
belt reflectivity
d-Color P116 Service Manual
Function
result
Color registration
Color registration
Y110260-4