Maintenance; Periodical Check; Maintenance Procedure (Periodical Check Parts); Replacing The Separation Roller Assy - Olivetti PC-405 Service Manual

Field Service Ver. 1.0 Jul. 2007

Maintenance

2.

Periodical check

2.1

Maintenance procedure (Periodical check parts)

2.1.1

Replacing the separation roller assy

A. Periodically replaced parts/cycle
• Separation roller assy: Every 300,000 prints
NOTE
• Replace the separation roller assy, feed roller and pick-up roller at the same time.
B. Replacing procedure
1. Remove the right door.
See P.12
[1]
[2]
[1]
Y109030-4
[2]
[1]
A093F2C500DA
[3]
A093F2C501DA
Service Manual
2. Periodical check
2. Remove two screws [1] and remove
the separation roller mounting
bracket assy [2].
3. Remove two C-rings [1] and the
shaft [2], and remove the separation
roller fixing bracket assy [3].
NOTE
• Be careful not to lose spring at this
time.
3