Connection Procedures - Olivetti d-Color P116 Service Manual

3.8

Connection Procedures

<USB Connection>
Prepare a USB Cable.
Note! • The cable of the printer is not attached. Users should buy seperately.
• Obtain the cable of USB specification by yourself.
• Use the USB cable of Hi-Speed specification in case the connection is to be made
using "HI-Speed" mode of USB2.0.
Switch off the power of the printer and computer.
Memo Although the USB cable can be connected or removed with the switch of the computer
and printer on, switch off the power of the printer at this step in order to ensure installation
of the printer driver and USB driver later.
Connect the printer with the computer.
(1) Plug the USB cable into the USB interface connector of the printer.
(2) Plug the USB cable into the USB interface connector of the computer.
Note! Be careful not to insert the USB cable into the network interface connector.
Or else it may cause troubles.
50
USB Interface Connector
d-Color P116 Service Manual Y110260-4