Printer Installation; Precautions And Prohibition - Olivetti d-Color P116 Service Manual

3.

PRINTER INSTALLATION

3.1

Precautions and Prohibition

• Do not install the printer in the vicinity of high temperature or fire.
• Do not install the printer at the place where a chemical reaction may take place (laboratory, etc.).
• Do not install the printer near flammable solution like alcohol, thinner, etc.
• Do not install the printer at the place where a small child can reach.
• Do not install the printer at an unstable place (unsteady frame, tilted place, etc.).
• Do not install the printer at a highly humid or dusty place or under the direct sunshine.
• Do not install the printer under the environment of sea breeze or caustic gas.
• Do not install the printer at a highly vibrating place.
• When you drop the printer or damage the cover, remove the power plug from the outlet and contact
the Customers' Service Center.
Electric shock, fire or injury may occur.
• Do not connect the power cord, printer cable and earth wire as otherwise directed by the Manual.
A fire may break out.
• Do not insert a thing in the vent hole.
Electric shock, fire or injury may occur.
• Do not place a cup with water on the printer.
Electric shock or fire may occur
• Do not touch the fuser unit when you open the printer cover.
Burn may occur.
• Do not throw the toner cartridge or image drum cartridge into fire.
Burn may occur by the dust explosion.
• Do not use a highly flammable spray near the printer.
Fire may break out as there are high temperature parts inside the printer.
• When the cover becomes abnormally hot, a smoke arises or a strange odor comes out, remove
the power plug from the outlet and contact the Customers' Service Center.
Fire may break out.
• When liquid like water drops inside the printer, remove the power plug from the outlet and contact
the Customers' Service Center.
Fire may break out.
• When a thing like a clip drops inside the printer, remove the power plug from the outlet and take
out that thing.
• Do not operate or disassemble the printer as otherwise directed in the Manual.
Electric shock, fire or injury may occur.
30 d-Color P116 Service Manual Y110260-4