Table of Contents
Advertisement
TEO-540-A1A Engine Installation and Operation Manual
(2) Remove, clean, and install the oil suction screen.
(3) Add the correct grade and quantity of oil to the engine per the latest revision of
Service Instruction No. SI-1014 and Appendix A of this manual.
WARNING IF DURING AN OPERATIONAL TEST OR ENGINE IDLE
3. Proceed to the "Engine Initiation" chapter for the remaining procedures to put the engine into
service.
© 2018 Avco Corporation. All Rights Reserved
October 2018
ANNUNCIATORS ILLUMINATE OR ANY OPERATIONAL
PROBLEMS OCCUR, IDENTIFY THE FAULT(S) USING THE
FST, CORRECT THE CONDITION(S), AND CLEAR THE
FAULT(S) OR CONTACT LYCOMING ENGINES.
Field Run-In
Page 45
Advertisement
Table of Contents
