VISIX SOLUTIONS | VISIX VX-FR-01 Facial Recognition Camera – Hardware Installation Manual
Camera Installation
The VX-FR-01 can be installed on a ceiling or wall with cabling routed through the bottom of the mounting
base (A) or through the side of the mounting base (B).
A
For instructions on routing the cabling through the bottom of the mounting base (A), see Section
2.2.1.
For Instructions on routing the cabling through the side of the mounting base, see Section 2.2.2
2.2.1 INSTALLATION – ROUTING CABLING THROUGH BOTTOM
1. Using the mounting base cover as a template, use a pencil to mark the four fastening points. Use
the pencil to trace the circumference of the cable routing hole. Be sure the camera will be facing the
correct direction. The Front is clearly labelled on the inside the camera base cover.
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
VX-FR-01 - Cable Routing Options
Figure 2-2
Using the Base Cover as a Template
Figure 2-3
B
10