Figure 22. Removing The Power Supply Module; Figure 23. Removing The Filler Panel; Figure 24. Installing The Power Supply Module - Intel JBOD2000S3SP Service Manual

If a filler panel is installed, use the 'finger hole' to remove the filler panel (see letter "B").
-
2. Do one of the following:
Insert the power supply module into the power supply cage and push all the way until it clicks
-
into place (see letter "C").
If no power supply is to be installed, install the filler panel into the power supply cage.
-
12
Intel® Storage Server System JBOD2000S3 Service Guide

Figure 22. Removing the Power Supply Module

Figure 23. Removing the Filler Panel

Figure 24. Installing the Power Supply Module