Bezel; Hot-Swap Sas/Sata Backplane; 12 X 3.5-Inch Hard Drive Backplane; Figure 6. Front View Of Front Bezel - Intel JBOD2000S3SP Service Manual

1.7 Bezel

The front bezel is available as an optional accessory for the server system:

1.8 Hot-Swap SAS/SATA Backplane

The Hot-Swap SAS/SATA backplane serves as an interface between the SAS expander(s) and the system
drives. The following diagrams show the location for each connector found on the backplane.

1.8.1 12 x 3.5-inch Hard Drive Backplane

4
Intel® Storage Server System JBOD2000S3 Service Guide

Figure 6. Front view of Front Bezel

A SAS/SATA Hot-swap Connectors

Figure 7. 12 x 3.5-inch Hard Drive Backplane Components (Front View)

A Mini-SAS Connectors
B Power Connectors
C I 2 C Connector

Figure 8. 12 x 3.5-inch Hard Drive Backplane Components (Rear View)