Table of Contents
Advertisement
2.
On the
previous page), to continue the reset.
When the reset is complete, a
General Settings
Updating Firmware using PCS
If you are notified that new firmware is available for your switcher, download the firmware
file from the Extron website and install it on your computer. You can then upload the new
version of firmware to the switcher using PCS.
To find out the version of firmware currently loaded on your SW4 12G HD-SDI, select
>
Settings
screen (see figure 20,
Figure 20.
Alternatively, select the
If a newer firmware version is available, download the latest firmware file for the switcher to
your computer (see
screen, click the
Reset Device
Settings Reset
screen and the
from the
Hardware Settings
).
1
Firmware Version on Unit Information Screen
General Settings
Downloading the SW4 12G HD-SDI firmware
SW4 12G HD-SDI • Software Configuration and Control
button (see
figure
Reset
message appears at the top of the
screen closes.
Reset Device
menu to display the
Device
tab and click the
Hardware Settings
19,
, on the
1
Unit Information
button.
on the next page).
27
Advertisement
Table of Contents
