Enabling and disabling front panel lockout
In the
Front Panel Lockout (Exec Mode)
Figure 17.
Unlock Front Panel (default) — The front panel input buttons are available to any user
•
for input selection.
Lock Front Panel — The front panel input selection buttons are disabled.
•
When a lock mode button is selected (changing the mode), all LEDs on the front panel blink
three times.
Configuring auto-input switching
To enable auto-input switching, select the
panel.
Switch
Figure 18.
To select the auto-input switching priority, select one of the following radio buttons:
•
Priority to Highest Active Input Number
with the highest number.
•
Priority to Lowest Active Input Number
with the lowest number.
Resetting the Unit
To reset the SW4 12G HD-SDI to its factory defaults while retaining the current firmware
version:
1.
From the
Figure 19.
Front Panel Lockout Panel
Auto Switch Panel
menu, select
Device
Reset Device
Reset Device Screen
SW4 12G HD-SDI • Software Configuration and Control
panel, select the desired radio button:
checkbox in the
Enable Auto Switch
— The switcher selects the active input
— The switcher selects the active input
. The following window opens.
Auto
26