Maintenance And Repairs; Routine Maintenance; Cleaning And Disinfection - gbo Medizintechnik ULTRATHERM 1008 Instructions For Use Manual

38
8
8.1
8.2
© gbo Medizintechnik AG

Maintenance and repairs

Routine maintenance

As the manufacturer, we are responsible for the safety and reliability of the
unit only if it is used in accordance with the instructions for use.
Safety inspections, maintenance, repairs and modifications may be performed
only by our company or expressly authorized service personnel.
In case of defects, components must be replaced by original parts.
In accordance with the law concerning medical products, the unit must be en-
tered in a medical products log.
Instruction, safety inspections and repairs must be entered with the date of
performance in the medical products log.

Cleaning and disinfection


Switch off the power switch.

Unplug the power plug from the socket before cleaning or disinfecting
the unit!

Clean and disinfect the unit and accessories on all external surfaces
with a slightly damp cleaning cloth. Use a commercially available
cleaning or disinfection agent that is intended for use in medical facili-
ties.
We recommend Bacillol-AF for the disinfection. (Please follow the rec-
ommendations of the manufacturer.)
Under no circumstances may liquid penetrate the openings on the unit,
e.g. the connecting sockets of the electrode cables! Therefore, do not
use cleaning or disinfectant sprays! The unit, electrodes and cables may
not be sterilized using steam or gas!
Never clean the unit with abrasives, disinfectants or solvents that could
scratch the housing or damage the unit.
 Wait until the unit is completely dry before operating it again.
ULTRATHERM 1008
Version 1.7