Maintenance; Duodynator; Neoserv - gbo Medizintechnik Duodynator Instructions For Use Manual

Duodynator

6 Maintenance

6.1 Duodynator
Functionality, reliability and safety characteristics of the Duodynator are guaranteed
only upon handling the device in accordance with the operating instructions. Safety
control, maintenance work, repair work and modifications must only be carried out by
the manufacturer or by service agents authorized by him. In case of a failure, parts which
influence the safety of the device must only be replaced by original spare parts of the
manufacturer. The electric installation must correspond to the requirements in
accordance with VDE/IEC. The device does not contain any parts which need
maintenance work done by the user .

6.2 Neoserv

the container drain into the receiving vessel. Is all the liquid out of the container, put
the hose back on the sealing nipple.
At the annual safety inspection, the service technician should clean the container.
This is accessible from the rear of the Neoserv. First drain the tank as described
above. Then tilt it slightly backwards and unscrew the container. You can now clean
it under running water and screw back into the machine.
 gbo Medizintechnik AG
The Neoserv is a suction application device. An under
pressure is generated in the device which sucks the air
from electrodes into the device. In the device a water-and
dirt separator keeps liquids away from the pump liquids.
This container is provided with a water level control.
When filling the container beyond a certain limit, a
message is displayed which recalled that the container
needs to be drained. Hold a container ready and pull the
hose to empty the container at the back of the device from
the lock nipple. Turn the hose down and let the liquid of
27
Version 1.2