ULTRATHERM 1008
7.9
7.10
7.11
© gbo Medizintechnik AG
Interrupting/ending treatment
Press the STOP key to interrupt the treatment or wait until the treat-
ment duration has elapsed (signal tone).
Remove the electrodes and ask the patient how he feels.
Changing the basic settings
Switch off the power switch.
Press the multi-function rotary switch and hold it down.
Switch the unit on by means of the power switch and wait (with the
multi-function rotary switch depressed) until the basic settings menu is
displayed.
Turn the multi-function rotary switch until the desired parameter line is
selected.
Press the multi-function rotary switch. The value to be changed in this
line is displayed inversely.
Set the desired parameter value by turning the multi-function rotary
switch.
Confirm the set value by pressing the multi-function rotary switch. The
entire line is then inverted again.
Change further basic parameters or switch to the main menu by press-
ing the function key (ESC).
Parameter
Pulse duration
Volume
Service code
language
LCD brightness
LCD contrast
Placing out of operation
In order to disconnect the device just disconnect it from the mains power
supply. No other measures are to be taken
Default value
400 s
50 %
0
DE
70 %
70 %
Range
200 - 600 s
0 – 100 %
–
DE, EN, FR, ES, IT,
RU, PT, TU
10 - 100 %
0 - 100 %
Version 1.7
37