Implementation Of The Treatment; Treatment With Interference Currents; Therapy With Single Channel Currents - gbo Medizintechnik Duodynator Instructions For Use Manual

Table of Contents

Advertisement

20

4.3 Implementation of the treatment

4.3.1 Treatment with interference currents

Turn on the power switch on the back of the unit.
1.
The unit performs an automatic self-test of all functions.
2.
Error free self-test is completed by displaying the Home screen.
3.
Connect the accessory for interference currents to the socket on the right side, if
4.
necessary, connect the cable of the Neoserv.
Apply the electrodes to the patient (see section 5.1).
5.
Press the button interference =
6.
loaded.
If necessary, change the therapy as described in chapter 4.2 "Selection of
7.
therapies"
If necessary, change the parameters and the duration for therapy.
8.
Turn the intensity up slowly until the interference current is clearly perceptible,
9.
but not loosen muscular contraction duration from.
At the end of treatment, the Therapy-end signal sounds and the intensity
10.
automatically goes to "0.0".

4.3.2 Therapy with single channel currents

Turn on the power switch on the back of the unit.
1.
The unit performs an automatic self-test of all functions.
2.
Error free self-test is completed by displaying the Home screen.
3.
Connect the accessory for single-circuit currents in the socket on the right side, if
4.
necessary, connect the cable to the Neoserv.
Apply the electrodes to the patient (see chapter).
5.
Press the button single channel =
6.
automatically loaded.
Select a channel button channel I or II. The selected channel is connected to the
7.
detail window.
If necessary, change the therapy as described in chapter 4.2 "Selection of
8.
therapies"
If necessary, change the parameters and the duration for therapy.
9.
Turn on the intensity knob until the desired stimulus success occurs.
10.
At the end of treatment, the Therapy-end signal sounds and the intensity
11.
automatically goes to "0.0".
 gbo Medizintechnik AG
. The last selected therapy is automatically
. The last selected therapy is
Duodynator
Version 1.2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Neoserv

Table of Contents