About This Guide; What's Inside - 3D Systems ProX User Manual

Sls single use mqc system

Table of Contents

INTRODUCTION

Thank you for purchasing the 3D Systems ProX™ MQS (Material Quality Control) 3D Production Printer, auxiliary SLS

equipment, and 3D Systems materials! Before you start printing parts with your process facility, please read this guide carefully

to enjoy optimum process performance and longer equipment service life .

ABOUT THIS GUIDE

This guide describes how to operate and maintain your ProX

For part printing instructions, refer to the

MQC System Operations

This section details the operation of the MQC System including part breakout .

Safety Guidelines and Instructions

The Safety section tells you what you need to know to avoid injury or equipment damage . Read this section before you switch

on power to any SLS equipment or handle any material .

ProX® MQC Single Use System Operations

This section details the operation of the ProX

3D Systems, Inc.

Material Quality Control (MQC) System used for the SLS process .

Material Guide

for your specific material.

MQC System including part breakout .

p/n 77-D005 Rev_A

Table of Contents

Do you have a question about the ProX and is the answer not in the manual?