Table of Contents
Advertisement
Changing the default settings of the amplifier
Installation image (with optional accessories):
Front
Center speaker
speaker
(left)
Subwoofer
Surround
speaker
(left)
Change settings according to the connected speakers.
Speaker delay setting (See page 44.)
Speaker level setting (See page 45.)
Test tone (See page 45.)
Front
Example:
speaker
(right)
If the right surround speaker is 10 feet (3.3 m) away from the listening position,
change settings as shown below (adjust the SR).
SW
Surround
speaker
(right)
SL
1
In "Speaker delay setting", set the right surround speaker (SR) to 10 feet (3.3 m).
2
In "Speaker level setting", slightly increase the level of the right surround speaker
as it is a little farther than others (see page 45).
3
In "Test tone", check the sound from each speaker (see page 45).
Note:
The subwoofer setting applies to a subwoofer connected to SUBWOOFER PREOUT.
CT
FR
FL
SW
SR
SL
Default setting: 6 feet (2 m)
CT
FR
FL
10 feet
(3.3 m)
SR
SD-AS10
43
Advertisement
Table of Contents
