To Change The Angle; To Zoom Images (Zoom) - Sharp SD-AS10 Operation Manual

Useful operation (continued)
SD-AS10

" To change the angle

You can change the angle of view when playing a DVD disc that contains scenes
recorded from multiple angles.
1
When "ANGLE" appears on the TV
during playback, set the MODE 1/
MODE 2 switch to MODE 2 and
press the ANGLE button.
2
Use the ANGLE button to select an
angle number.
Each time you press, the angle changes.
Notes:
! Some DVDs prohibit changing the angle.
! The angle number is not displayed if there is no other angle recorded. " " is dis-
played instead.
! Refer to the manual of the disc as the operation may vary depending on the disc.
30

" To zoom images (zoom)

You can magnify images during playback.
1
In the pause mode or during play-
back, set the MODE 1/MODE 2
switch to MODE 2 and press the
ZOOM button.
Pressing the button cycles through the zoom settings as follows:
ZOOM X1.5
2
To shift the view and display the desired part of a zoomed image,
press the , ,
1
2
To return to normal view:
Press the ZOOM button repeatedly to select "ZOOM OFF".
When you cancel the zoom function, you cannot shift the view.
Notes:
! An image may become distorted when zoomed.
! Subtitles cannot be zoomed.
ZOOM X1.5
ZOOM X2 ZOOM X3
or button repeatedly.
ZOOM OFF