Operations After Setting The Timer - Sharp SD-AS10 Operation Manual

Operations after setting the timer

SD-AS10
1
After setting the timer
! The unit is in the timer stand-by mode.
! If the timer set indicator does not light up, turn on the power and set the timer
again.
2
At the start time
The volume will increase gradually until it reaches the preset volume.
3
When the finish time is reached
The unit is set to the power stand-by mode automatically.
52
" Checking the timer setting
1
2
3
" Canceling the timer setting
Lights up
1
2
3
" Changing the timer setting
Perform steps 1 - 10 on page 51 to set the timer again.
" To use the same timer setting
Flashes
Once timer:
1
2
3
4
Daily timer:
The timer will operate at the same time every day. It will continue until the daily timer
setting is canceled. Cancel the daily timer when it is not in use.
When you use the same setting for the daily timer, select "DAILY TIMER" instead of
"ONCE TIMER", and select "DAILY ON" instead of "ONCE ON".
Press the TIMER/SLEEP/CLOCK button.
Within 10 seconds, press the or
TIMER", and press the ENTER button.
Within 10 seconds, press the or
CALL", and press the ENTER button.
The unit returns to the timer stand-by mode after displaying the settings in order.
Press the TIMER/SLEEP/CLOCK button.
Within 10 seconds, press the or
TIMER", and press the ENTER button.
Within 10 seconds, press the or button to select "ONCE OFF" or "DAILY OFF",
and press the ENTER button.
Timer will be canceled (the setting will be retained).
Turn on the unit, and press the TIMER/SLEEP/CLOCK button.
Within 10 seconds, press the or
the ENTER button.
Within 10 seconds, press the or
ENTER button.
Press the POWER button to enter the power stand-by mode.
button to select "ONCE TIMER" or "DAILY
button to select "ONCE CALL" or "DAILY
button to select "ONCE TIMER" or "DAILY
button to select "ONCE TIMER", and press
button to select "ONCE ON", and press the