Table of Contents
Advertisement
Setting
Selectable parameters (* indicates
initial settings.)
General
Picture Mode
Auto
Film
Video
Smart
Super Smart*
Angle Mark
ON*
OFF
OSD Language
English*
French
Spanish
Screen Saver
ON*
OFF
Audio
Audio Out
BIT STREAM*
PCM
LPCM Output
48K LPCM 48k
96K LPCM 96k*
Images are automatically optimized according to the video source.
Suitable for progressive video output. Select for DVD movies, etc.
Suitable for interlaced video output. Select for DVD karaoke, etc.
Optimize special effects for progressive video output.
Special effects are enhanced more than "Smart".
You can switch camera angles if recorded on the disc.
The angle mark does not appear.
You can select the desired OSD (On Screen Display) language for the setup menu or playback control screen.
Press the
button. After 5 minutes or more of inactivity, a screen saver appears.
To turn off the screen saver on the screen, press any button on the main unit or remote control.
Cancel the screen saver setting.
Choose this when connecting the unit to a Dolby Digital/DTS (5.1 ch) surround amplifier. When playing a DVD record-
ed in Dolby Digital or DTS, bitstream output allows you to enjoy the 5.1 ch surround sound.
Choose this for PCM output. When playing a DVD recorded in Dolby Digital, the output converts to 2-channel PCM.
When a DVD recorded in DTS is played back, signals are sent in bitstream.
If 48K LPCM 48k is selected, PCM sound signals recorded at 96 kHz are converted to 48 kHz.
Description
SD-AS10
47
Advertisement
Table of Contents
