Sharp MD-X60H Operation Manual page 47

<P=003>
(Continued)
AUX
INPUT LEVEL
AUX
VOLUME
1
2
MD
4
1
Listening to sound from an external unit
To listen to sound from an external unit connected to the digital input
terminal:
VOLUME
1
Press the AUX button.
Select "AUX OPT.".
2
Start playback on the external unit.
3
Adjust the sound level using the VOLUME buttons on this unit.
To listen to sound from an external unit connected to the analogue
input terminals:
1
Press the AUX button.
Select "AUX 1" or "AUX 2".
2
Start playback on the external unit, and adjust the input sound level using the
INPUT LEVEL control.
When the INPUT LEVEL control is set to Min, no sound is obtained.
The maximum level should not exceed "0 dB".
3
Adjust the sound level using the VOLUME buttons on this unit.
Recording sound from an external unit
To start recording the moment the external unit starts playback
(synchro recording):
MD recording will start automatically, as soon as playback starts on the external
4
unit. This applies to both digital inputs and analogue inputs.
The space-cut function and auto-mark function will work automatically during
MD
synchro recording.
3
1
Press the AUX button.
Select "AUX 1", "AUX 2" or "AUX OPT.".
Select the input that corresponds to the terminals where the external unit you
will record from is connected.
2
Start the recording on the external unit, and adjust the recording level using
the INPUT LEVEL control. (This is only necessary when recording from anal-
ogue inputs.)
In the case of digital inputs, it is not necessary to adjust the recording level.
The maximum level should not exceed "0 dB".
Adjust the recording level, and then stop the external unit.
3
Load a recordable MiniDisc.
4
Press the SOUND SYNCHRO button.
5
Start playing the music you want to record on the external unit.
Recording will start automatically.
6
When playback has finished on the external unit, this unit will automatically
enter the recording stand-by mode.
Cancel the mode by pressing the MD
When the MD
If you want to perform other operations at this point, wait until this display dis-
appears.
To stop recording:
Press the MD
Note:
On some CD players, the track numbers cannot be recorded automatically.
46
MD-X60H(SUK) TINSE0227AWZZ
AUX 1 AUX 2 AUX OPT.
AUX 1 AUX 2 AUX OPT.
button.
button is pressed, the TOC will be recorded.
button.