Sharp MD-X60H Operation Manual page 27

Md/cd component system
Hide thumbs Also See for MD-X60H:
Table of Contents

Advertisement

YO
<P=001>
(Continued)
2
4
DISPLAY
DISPLAY
Stereo recording
3
Monaural extended length recording Lit
4
Recording from a CD onto a MiniDisc (One-Touch Editing)
A CD can be recorded to a MiniDisc, starting from the first track, with a one-touch
operation. More than one CD can be recorded consecutively.
1
1
Press the CD
2
2
Load a compact disc and a recordable MiniDisc.
MD
The total number of tracks and the total playing time on the CD will be displayed.
When a new recordable MiniDisc is loaded, it will take about 15 seconds to
enter the recording stand-by mode.
3
3
Check the recording mode by pressing the REC MODE button.
Each time the button is pressed, the display will switch between the stereo mode
and the monaural long-play mode.
This mode cannot be changed whilst recording.
When a track which was recorded in monaural sound is played back, "M" will
be displayed after the track number.
MD
4
Press the CD
3
The compact discs loaded in DISC-1 - DISC-3 will be recorded in order, starting
from the first track on DISC-1. When a MiniDisc runs out of recording space or
1
when a compact disc has been completely recorded, the CD and the MD will
stop automatically.
If recording does not begin
When a disc is loaded in each of DISC-1 - DISC-3, if all of the tracks on the discs
cannot be recorded, the number of tracks that cannot be recorded will be displayed.
Next the number of tracks that can be recorded will appear. The unit will then
enter the recording stand-by mode.
0
Press the CD
Recording will begin, starting from the first track on DISC-1.
After recording all of the tracks that can be recorded, the unit will stop automat-
ically.
To cancel the operation:
Before pressing the CD
To stop recording:
Press the CD
Playback and recording will stop after the track numbers have been written to
the MiniDisc.
It is not possible to pause in the recording mode.
To check the remaining time available for recording:
Press the MD
Load a MiniDisc.
Press the DISPLAY button.
After the number of tracks are recorded, the available time remaining will be
displayed, Five seconds later, the unit will return to the original display.
26
MD-X60H(SUK) TINSE0227AWZZ
button.
0
MD button.
MD button.
0
MD button, press the CD
or MD
button.
button.
or MD
button.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-x60h

Table of Contents