Table of Contents
Advertisement
<P=003>
(Continued)
2
3
2
2
1
MD
3
2
4
1
3 3
MD
2
APMS recording
1
Select tracks for APMS playback. (Page 23)
2
Load a recordable MiniDisc.
0
3
MD
Press the CD
APMS playback will start, and recording will start automatically.
POLE
Programmed tracks will be recorded in order. After the unit has finished recording
POSITION
the last track, recording will stop automatically.
If you press the POLE POSITION button before pressing the CD
a recording can be made from the beginning of the MiniDisc. (Page 30)
If recording does not begin, press the CD
To stop recording:
Press the MD
button.
To re-record
When you want to re-record, you can erase a track that is already recorded, starting
from any point in the old track, to begin a new recording. Be aware that when you
do this, all of the tracks and track names that follow the newly recorded track will
MD
be erased.
1
1
During playback, press the MD
begin re-recording.
The unit will pause.
2
Press the MD
"R. ERASE OK?" will be displayed.
3
Press the ENTER button.
This unit will be in the recording pause mode.
To cancel the operation, press the MD
4
Select the recording source and start recording.
To record without using One-Touch Editing
Without using one-touch recording, the following operation allows you to record
from the first track.
1
MD
Press the CD
1
2
Load a compact disc and a recordable MiniDisc.
3
4
Press the MD
The unit will enter the recording stand-by mode.
4
Press the CD
0 6
To stop recording:
Press the MD
button.
After the track number has been written on the MiniDisc, the recording will stop.
However, CD playback will continue.
28
MD-X60H(SUK) TINSE0227AWZZ
MD button.
0
MD button again. (See page 26.)
0
button at the point where you want to
6
REC button.
button.
button.
REC button.
button.
0
MD button,
Advertisement
Table of Contents
