Sharp MD-X60H Operation Manual page 41

<P=002>
(Continued)
2
1
2
3
4
2
2
3
4
Erase
To erase tracks one at a time:
1
1
Whilst in the stop mode, select the track you want to erase using the jog dial.
Or start playing the track to be erased, and then press the MD
MD
The unit will enter the pause mode.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select "ERASE"
3,4
using the jog dial.
1,2
3
Within 10 seconds, press the ENTER button.
To cancel the operation, press the MD
4
Press the ENTER button again.
The track is erased, and the unit is stopped at the beginning of the previous
track.
Notes:
Once a track has been erased, it cannot be recovered. Double-check the track
number before erasing it.
When a track is erased, the numbers assigned to the tracks following the erased
track will be automatically decreased by one.
When a track is erased, the track name will be erased at the same time.
This function cannot be used whilst a programme is being entered ("PROGRAM"
is lit: Page 23) or whilst in the random play mode ("RANDOM" is lit: Page 22).
First, cancel the programme or random play mode before trying to use this
function.
To erase all of the tracks at once:
1
Press the MD
The total number of tracks and the total playing time on an MD will appear.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select "ALL ERASE"
1
using the jog dial.
3
Within 10 seconds, press the ENTER button.
3,4
To cancel the operation, press the MD
4
2
Press the ENTER button again.
All of the track numbers and track names will be erased.
Note:
This function cannot be used whilst a programme is being entered ("PROGRAM"
is lit: Page 23) or whilst in the random play mode ("RANDOM" is lit: Page 22).
First, cancel the programme or random play mode before trying to use this
function.
40
MD-X60H(SUK) TINSE0227AWZZ
button.
button.
button.
button.
0 6