Sharp MD-X60H Operation Manual page 11

Md/cd component system
Hide thumbs Also See for MD-X60H:
Table of Contents

Advertisement

YO
<P=001>
(Continued)
12 cm (5")
3
8 cm (3")
The blue frame that corre-
sponds to the selected CD
tray will light up.
More tracks indicator
Music schedule
Total number of
Total playing time
tracks
The tray with a CD will be displayed.
Loading and playing CDs
1
Press the CD
The power will be turned on automatically, and the unit will enter the CD mode.
2
Press the CD
Press one of the CD 1
want to load.
You cannot open more than one disc tray at the same time.
3
Place the CD(s) on the disc tray, label side up.
5
Be sure to place 8 cm (3") disc in the middle of the disc holder.
1
Caution:
Do not place more than one CD in any tray position.
This can damage the player and the CDs.
2,4
4
Press the CD
Repeat steps 2 - 3 to load one disc each into the second and third disc trays.
The total number of tracks and the total playing time on the selected disc will
be displayed. At this time, the blue frame that corresponds to the selected disc
tray will light up.
The music schedule will be displayed only for the number of tracks on the disc.
If the CD contains more than 21 tracks, "
5
Press the CD
Playback will begin from track 1 on the disc you have selected to play.
After the disc finishes playing, the next disc will automatically play.
1
When there is no CD in one of the disc 1 - 3 trays, that tray will be skipped
and the next CD will be played.
5
When the CD
frame mark of Disc 1 is lit), the track will be played.
If you press the CD
will be played.
If the CD 3
0
When the last track on the third disc has finished playing, the unit will stop
automatically.
To interrupt playback:
Press the CD
0 6
Press the CD
0 6
To stop playback:
Press the CD
To remove the CDs:
Whilst in the stop mode, press the
When playing back a CD, it is possible to remove or change the other two discs.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
10
MD-X60H(SUK) TINSE0227AWZZ
button.
7
button to open a disc tray.
0
0
- CD 3
buttons depending on which disc tray you
button of the disc tray that is open.
7
" will appear.
C
button.
0 6
button is pressed after a track is selected (whilst the blue
0 6
button and then the CD 2
0 6
button is pressed, only disc 3 will be played.
button.
button to resume playback from the same point.
button.
button.
7
button, discs 2 and 3
0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-x60h

Table of Contents