Sharp MD-X60H Operation Manual page 38

<P=003>
(Continued)
TIMER/
DELETE
NAME/
TOC EDIT
4
5
4
5
To change disc names and track names
To change disc names:
Jog dial
1
During playback, press the MD
2
Press the NAME/TOC EDIT button, and then select "DISC NAME" using the
MD
jog dial.
To change track names:
ENTER
1
Whilst in the stop mode, select the track name you want to change, using the
jog dial.
2
Press the NAME/TOC EDIT button.
3
Within 10 seconds, press the ENTER button.
The unit will enter the character input mode.
To cancel the operation, press the MD
4
Press the
3 / 2
flashing.
5
Press the TIMER/DELETE button.
6
Press the NAME/TOC EDIT button.
To add a character:
After performing steps 1 to 3 above, do the following:
Example: To change "BET" to "BEST"
4
Press the
3 / 2
a letter begin flashing.
5
Select the character you want to add, using the jog dial. Then, press the ENTER
button.
6
Press the NAME/TOC EDIT button.
37
MD-X60H(SUK) TINSE0227AWZZ
button.
button.
button to make the character you want to erase begin
button to make the character at the place you want to add