Basic Setup; Configure Sensor Type; Join Device To Network - Emerson Rosemount X-well 648 Reference Manual

Configuration
July 2016
2.6

Basic setup

2.6.1

Configure sensor type

Fast Keys
Every temperature sensor has unique characteristics to achieve the most accurate
measurement. Configure the Rosemount 648 Wireless to match the specific sensor type.
1.
2.
3.
This method allows selection of the number of lead wires and temperature engineering
units for the sensor.
2.6.2

Join device to network

Fast key
To communicate with the Smart Wireless Gateway, and ultimately the host system, the
transmitter must be configured to communicate over the wireless network. This step is the
wireless equivalent of connecting wires from a transmitter to the host system.
1.
2.
3.
Using a Field Communicator or AMS Device Manager to communicate with the transmitter,
enter the Network ID and Join Key so they match the Network ID and Join Key of the Smart
Wireless Gateway and the other devices in the network. If the Network ID and Join Key are
not identical to those set in the Gateway, the transmitter will not communicate with the
network. The Network ID and Join Key may be obtained from the Smart Wireless Gateway
on the System Settings>Network>Network Settings page of the Smart Wireless Gateway web
based user interface.
14
2, 1, 1
Form the Home screen, select 2: Configure.
Select 1: Guided Setup
Select 1: Configure Sensor, then follow on the on-screen instructions to complete
the configuration.
2, 1, 2
From the Home screen, select 2: Configure.
Select 1: Guided Setup.
Select 2: Join to Network.
Reference Manual
00809-0200-4648, Rev BB
Configuration