Kenmore KM1000 Use & Care Manual page 20

Maintaining Your Water Optimizer
DP1
6. Slide the blue
7. Press the dark gray
while keeping the sleeve pressed in, pull down and remove the white
8. Now, press and hold the
flow from the drain port stops, indicating your Optimizer has been fully drained.
JJ
9. Replug the
10. Next, if applicable, shutoff the
between your Optimizer's
(i.e. coffee maker) and disconnect the tubing from the port. Placing a towel underneath
your ports will help save time cleaning up drippage.
11. Make any necessary adjustments to your accessory appliances in lieu of them no longer
receiving water (i.e. powering them off in necessary).
Maintaining Your Water Optimizer 16
Retainer Clip
JJ
DP2
DP2
Quick Connect Sleeve
N
Dispense Button
Appliance Drain Port
C
AA
Accessory Output Port
JJ
off of the Appliance Drain
DP3
all the way up into the port then,
(with Cold Mode
by repeating "Step 7"
1/4 in. Quick Connect Shutoff Valve
Port.
DP1
DP3
selected) until water
in reverse.
and any accessory appliances
Plug.
connected