To Change The Ac Transfer Mode - Xantrex Freedom X 1200 120VAC Owner's Manual

Freedom X Owners Guide.book Page 44 Wednesday, May 11, 2016 10:32 AM
Freedom X Inverter Configuration

To change the AC Transfer mode:

By default the operational mode is set to appliances (" || ").
1. Press and hold the button for three seconds.
2. Press the Scroll button until the left LCD Screen flashes
" ||" intermittently.
3. Press the button to select the setting.
The right LCD Screen will display the current setting "|| "
and then begin to flash intermittently.

This default setting is for typical
household appliances. It allows the transfer
of shore power (AC MODE) to the loads
from battery power (Batt. MODE) within
20 milliseconds and vice versa.
 This faster setting is for sensitive digital
equipment like desktop computers. The
transfer time is similar to a UPS in which it
allows the transfer of shore power (AC
MODE) to the loads from battery power
(Batt. MODE) within 10 milliseconds and
vice versa.
4. Continue pressing the Scroll
settings until you reach the desired setting.
44
5.
RISK OF DAMAGE TO FREEDOM X
Connect only sensitive digital equipment to the AC output when the AC
transfer mode is set to
appliances with motors, compressors, or heating elements do not require
faster transfer times which may put stress on the transfer relay.
Failure to follow these instructions can damage the unit.
button to cycle through the
Press the button to make the setting permanent.
or
Press the button to exit.
NOTICE

. Other equipment such as household
Freedom X Owner's Guide