Speed Of Iron; Setting The Iron Speed - Miele PM 1210 Operating Instructions Manual

Speed of iron

Setting the iron
speed
The new temperature value is now saved for that temperature selec-
tion button.
Tip: Before starting to iron, allow the roller to rotate for about
five minutes while unloaded so that the temperatures of the heater
plate and roller can equalize.
PM 1210 / PM 1214:
Symbol Speed range
 Low speed range
 Medium speed range
High speed range

PM 1217:
Symbol Speed range
 Low speed range
Medium speed range

 High speed range
Spin speed selection buttons
The roller speed can be set either via the spin speed selection but-
tons or alternatively via the  or – buttons.
Press the . button to access the roller speed selection mode.

The button will then be highlighted with a bar underneath.
Now press one of the three spin speed selection buttons.

(For example,  button)
The selected spin speed selection button will be highlighted with a
bar underneath and the iron speed will be adopted as the button
value.
Use
m
/ min
1.5–2.2
2.3–3.2
3.3–4
m
/ min
1.5–2.4
2.5–3.4
3.5–4.5
17