Ceiling-Mount Setup; Setting Up The Projector; Video Setup; Standard Setup (Front Projection) - Sharp Notevision PG-D45X3D Operation Manual

Setting up the Projector

If using this projector outside the U.S.A., please change setting to "0 IRE" in Video Setup. (See
page 44.)
For optimal image quality, position the projector perpendicular to the screen with the projector's
feet fl at and level. Doing so will eliminate the need for Keystone correction and provide the best
image quality. (See page 28.)
■
Place the projector at the required distance from the screen
according to the desired picture size. (See page 20.)
Example of standard setup

Side View

Screen
H
Note
• Refer to page 20
■
It is recommended that you use the
optional Sharp ceiling-mount adaptor and
unit for this installation. Before mounting
the projector, contact your nearest Sharp
Authorized Projector Dealer or Service
Center to obtain the recommended ceiling-
mount adaptor and unit (sold separately).
18
Lens center
L
for additional information concerning "Screen Size and Projection Distance".