Projection (Prj) Mode; Ceiling-Mount Setup - Sharp Conference Series Operation Manual

Projection (PRJ) Mode

The projector can use any of the 4 projection modes shown in the diagram below. Select the
mode most appropriate for the projection setting in use. (You can set the PRJ mode in "SCR"
menu. See page 55.)
■
Table mounted, front projection
[Menu item ➞ "Front"]
■
Table mounted, rear projection
(with a translucent screen)
[Menu item ➞ "Rear"]
a Ceiling-Mount Setup
It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this
installation. Before mounting the projector, contact your nearest Sharp Authorized Projector
Dealer or Service Center to obtain the recommended ceiling-mount adaptor and unit (sold
separately).
■
Ceiling mounted, front projection
[Menu item ➞ "Ceiling + Front"]
■
Ceiling mounted, rear projection
(with a translucent screen)
[Menu item ➞ "Ceiling + Rear"]
21