Adjusting The Projector Function ("Prj - Adj" Menu); Auto Sync (Auto Sync Adjustment); Auto Power Off Function; Auto Restart Function - Sharp Notevision PG-D45X3D Operation Manual

Adjusting the Projector Function ("PRJ - ADJ" Menu)

Pict. SCR PRJ-ADJ
1
Auto Sync
2
Auto Power Off
3
Auto Restart
4

STANDBY Mode

5
System Sound
6
Audio Out
7
Speaker
8
Audio Input
9
RS-232C
0
Fan Mode
System Lock
Lamp Timer(Life)
SEL./ADJ.
1 Auto Sync (Auto Sync
Adjustment)
Selectable
items
On Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
Off Auto Sync adjustment is not
automatically performed.
Note
• Auto Sync adjustment is also performed by
pressing AUTO SYNC.
• The Auto Sync adjustment may take some
time to complete, depending on the image of
the computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual
adjustments. (See page 51.)

2 Auto Power Off Function

Selectable
items
On When no input signal is detected for
more than 15 minutes, the projector will
automatically enter Standby mode.
Off The Auto Power Off function will be
disabled.
Note
• When the Auto Power Off function is set to
"On", 5 minutes before the projector enters
Standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.
Net. Help
On
On
On
Standard
On
VAO
On
Audio 1
9600bps
Normal
Disable
0 h 0 min 100%
ENTER END
Description
Description
Menu operation n Page

3 Auto Restart Function

Selectable
items
On If the power cord is unplugged from the
outlet or the breaker switch is turned off
when the projector is on, then the
projector automatically turns on when
the power cord is plugged into the AC
outlet or the breaker switch is turned on.
Off The projector does not turn on
automatically when the power cord is
plugged into the AC outlet or the
breaker switch is turned on.
4 STANDBY Mode
When set to "Eco", power consumption is
reduced in Standby mode.
Selectable
items
Eco The monitor output and Network
functions are switched off in Standby
mode.
Standard The monitor output and Network
functions are activated even if the
projector is in Standby mode.
5 Setting the Confi rmation
Sound (System Sound)
Selectable
items
On A confi rmation sound is made when
the projector turns on/off.
Off No confi rmation sound is made.
38
Description
Description
Description
45