Screen Size And Projection Distance; Projecting A Reversed/Inverted Image; Ceiling-Mount Setup - Sharp XV-Z10000 Operation Manual

Setup

Projecting a Reversed/Inverted Image

Projection from behind the screen
I Place a translucent screen between the projector and the au-
dience.
I Reverse the image by setting "Rear" for "PRJ Mode" in the
"Options" menu. See
page 69 for use of
this function.
Projection using a mirror
I Place a mirror (normal flat type) in front of the lens.
I Reverse the image by setting "Rear" for "PRJ Mode" in the
"Options" menu,
when the mirror is
placed on the audi-
ence side. See page
69 for use of this
function.
Info
When using a mirror, be sure to carefully position both the pro-
jector and the mirror so the light does not shine into the eyes of
the audience.

Ceiling-mount setup

I It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
I Before mounting the projector, contact your nearest Sharp
Authorised Projector Dealer or Service Centre to obtain the
recommended ceiling-mount bracket (sold separately). (AN-
TK202 ceiling-mount bracket, AN-TK201 extension tube, AN-
NV6T ceiling adaptors for AN-TK202 or AN-TK201.)
I Be sure to adjust the position of the projector to match the
distance (z) from the lens centre position (see page 29) to the
lower edge of the image,
when mounting the projec-
tor on the ceiling.
I Invert the image by setting
"Ceiling + Front" for "PRJ
Mode" in the "Options"
menu. See page 69 for use
of this function.
-30
When using the default setting.
MOn-screen Display
The image is reversed.
When using the default setting.
MOn-screen Display
The image is reversed.
When using the default setting.
MOn-screen Display
The image is inverted.