Keylock Function - Sharp Notevision PG-D45X3D Operation Manual

Adjusting the Projector Function ("PRJ - ADJ" Menu)
(Continued)

Keylock Function

Locking the Operation
Buttons on the Projector
Use this function to lock the operation buttons
on the projector.
■
Locking the Operation Buttons
Hold down ENTER on the projector for about
5 seconds while the projector is being turned
on.
On-screen display
• The Keylock function does not affect the
operation with the remote control buttons.
• You cannot use the Keylock function while the
projector is warming up.
■
Taking the Keylock off
Hold down ENTER on the projector for about
5 seconds.
On-screen display
• When the projector is in Standby mode, you can
release the keylock by holding down ENTER
and STANDBY/ON on the projector
simultaneously for about 5 seconds.
Info
• Keylock cannot be set while the projector is:
displaying the "Menu" screens, in Standby
mode, warming up, changing input signals,
operating Auto Sync function, in Freeze mode
or on the "System Lock" screen during
warming up.
48