Table of Contents
Advertisement
Setting Up the Projector
Projection (PRJ) Mode
The projector can use any of the 4 projection modes, shown in the diagram below. Select the mode most ap-
propriate for the projection setting in use. (You can set the PRJ Mode in "SCR-ADJ" menu. See page 44.)
■ Table mounted, front projection
Menu item ➞ "Front"
■ Table mounted, rear projection
(with a translucent screen)
Menu item ➞ "Rear"
Ceiling-mount Setup
■ It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this installation. Before
mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain
the recommended ceiling-mount adaptor and unit (sold separately).
Indication of the Projection Image Size and Projection Distance
For details, refer to "Screen Size and Projection Distance" on page 17.
Example : When using a wide screen (16:9)
Picture Size
500"
200"
100"
80"
40"
-16
(Continued)
■ Ceiling mounted, front projection
Menu item ➞ "Ceiling + Front"
■ Ceiling mounted, rear projection
(with a translucent screen)
Menu item ➞ "Ceiling + Rear"
Projection
Distance
Advertisement
Table of Contents
