Dhcp Client Setting; Tcp/Ip Setting; Confi Rming The Projector Information - Sharp Notevision PG-D45X3D Operation Manual

Setting up the Projector Network Environment ("Network" Menu)
(Continued)

2 DHCP Client Setting

Connect the LAN cable before turning the
projector on. If not, the DHCP Client function
does not work.
Selectable items
On
Off
Select "On" for "DHCP Client". "Obtaining IP
Address..." appears, then the menu screen
appears. Confi rm the parameters of IP
Address, Subnet Mask and Gateway on the
TCP/IP screen.
If the DHCP server is not available, "Could not
obtain IP Address." appears.
In this case, set the TCP/IP manually. (See the
item 3.)

3 TCP/IP Setting

Set the TCP/IP manually.
1 1
Select "Off" for "DHCP Client",
then press
2 2
Select "TCP/IP", then press
.
Enter "IP Address" using P, R, Q
3 3
and O, then press
Setting the TCP/IP
IP Address
Subnet Mask
Gateway
Enter "Subnet Mask" using P, R,
4 4
Q and O, then press
Enter "Gateway" using P, R, Q
5 5
and O, then press
50
Description
Obtains confi guration
parameters for TCP/IP network
automatically.
Sets the TCP/IP manually.
.
.
Network
1 9 2 . 1 6 8 . 1 5 0 . 0 0 2
2 5 5 . 2 5 5 . 2 5 5 . 0 0 0
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
.
Selectable items
IP Address
Subnet Mask
Gateway
Note
• Confi rm the existing network's segment (IP
address group) to avoid setting an IP address
that duplicates the IP addresses of other
network equipment or computers. If
"192.168.150.002" is not used in a network
with an IP address of "192.168.150.XXX", you
don't have to change the projector IP address.
• For details about each setting, consult your
network administrator.
4 Confi rming the
Projector Information
You can confi rm the MAC address and
projector name.
Selectable items
MAC Address
Projector
Note
• For information on how to change the
.
projector name, see "SETUP MANUAL"
contained in the supplied CD-ROM.
Menu operation n Page
Description
Factory default setting:
192.168.150.002
Enter an IP address
appropriate for the network.
Factory default setting:
255.255.255.000
Set the subnet mask to the
same as that of the computer
and equipment on the
network.
Factory default setting:
000. 000. 000. 000
* When not in use, set to "000.
000. 000. 000".
Description
The MAC address of the
projector is displayed.
The projector name is
displayed.
38